GOLF SCOOTER & E-MOTORCYCLE, FAST & FREE SHIPPING FROM US & EUROPE

how to assemble electric scooter

How to Assemble Koppla Gator Motorcycle

July 13, 2020 1 Comment

How to Assemble Koppla Gator Motorcycle

KopplaMoto offers many quite necessary accessories and attachments to make sure your motorcycle installation right and assure our customers with a safe riding experience. If you’d like more functional and customized parts to fit your personnel needs, you could purchase it online and install with your original Koppla scooter as you want. Here below are written step-by-step instructions with corresponding videos for each accessory.

Shop now by visiting www.kopplamoto.com.

KopplaMoto uses third party to door carriers. Please check the package in good condition before you sign for it.

For entire assemble instructions video, please see below:

  1. Unbox the package: Remove the iron frame bars, open/cut the carton box, remove the cover that protect your motorcycle, un-clip the zip ties.
  2. Check the accessories and attachment list, make sure if you don’t miss any below accessories:
1pc
Front Wheel
2pc
Wrench
1pc
Adaptor
2pc
Metric Hex Key
1pc
Phone Charger(holder)
1set
Mirror
1pc
Display
1pc
DOT Helmet
1pc
Manual
1pc
Mud Guard
2set
Key Set
1pc
Waterproof Cover
  1. Install front wheel: First remember to remove the truck which was inserted into the fork by factory default; Put the two jacket on each side of the front wheel, lift the wheel between the fork, connect them with the truck, lock by screws.
  2. Install handlebar: Unravel the pad first, then position the handlebar and tighten them. Before going to crazy tight, adjust the angle of it, as it’s so much related to your proper body riding position(or height).
  3. Connect display: Plug the connector to the motorcycle, lock by screws.
  4. Install phone charger: Loose the buckle screw, locate it on the handle bar, lock it tight; Plug in the motorcycle so you can charge your phone via scooter battery.
  5. Install front fender: insert the fender according to screw location, lock tight by screw
  6. Install rear view mirrors: screw by hand, and lock tight by wrench
  7. Plug the battery, turn on the motorcycle, and your installation is complete.

Remind:

  1. Due to its automatic shut-off kickstand function, means when the kick-stander is unfolded, you cannot ride scooter, not defect or problem of your motorcycle, just in case of any mistaken operation before ready to ride.
  2. Always charge scooter in a dry environment. Keep charger dry and in a well ventilated area when charging your battery.
  3. While unplugged with the key in the OFF position, the motorcycle’s electronics will consume a very small mount of power and the power pack will drain extremely slowly. If you don’t ride for an extended period of time (30 days or more), you may want to disconnect the battery before you storage your Koppla in a garage.
  4. The power pack does not require nor benefit from deep discharging. To get the most power pack life, recharge each power pack immediately after each ride.
  5. Speed and range specs are maximum ratings under ideal conditions, i.e. light weight rider (relative to carrying capacity), good terrain (solid, flat, smooth & dry), properly inflated tires, etc. Less than ideal conditions will reduce speed, range and climbing ability.
  6. KOPPLA MOTORCYCLE recommends always wearing a helmet. Please check your local state laws for age restrictions and helmet requirements.

Read More:

How to Maintain Electric Scooter?

Buying Guides for fat tire motorcycle

Best Golf Scooter Brands on market 2021

Buying Guides for Golf Motorcycle

WARNING & SAFETY TIPS to ride a scooter

Fat Tire benefits

TROUBLESHOOTING for fat tire electric scooter

FAQs about fat tire scooter

Buy fat tire motorcycle

Buy eec/coc big wheel scooter

Buy golf scooter



1 Response

Jeremy R.
Jeremy R.

May 12, 2023

Do these have a street legal modification kit, or can they be made to be street legal?

Leave a comment